How To Remove Tile Backsplash – Expert Advice

Renovating your kitchen is one of the most exciting projects that you can take on. Since it’s the place where you’ll be preparing your meals, it’s important to keep it looking presentable at all times.

Out of the possible changes that you can make in your kitchen, replacing the backsplash never fails to breathe new life into it. Unfortunately, a lot of people think that you will have to spend hundreds or thousands of dollars to get it done.

Fortunately, removing the backsplash is completely doable on your own. But if you hesitate, we recommend a professional handyman to do the task for you. In this article, we will give you the step-by-step process of how to remove tile backsplash. We’ll give you the tips to make sure that you don’t damage your drywall, so you can incorporate newer tiles – and save you hundreds of bucks in the process.

How To Remove Tile Backsplash: Preliminaries

Before we begin, it’s important to make sure that you have already gathered all the tools and materials you need for this project. This will keep you from running back and forth to your toolbox or the hardware store.

Materials

Here are the materials needed to remove your tile backsplash:

  • Grout cutter
  • Tile Cutter
  • Chisel or screwdriver
  • Hammer
  • Blade scraper
  • Pry bar
  • 5-in-1 tool

Preparatory Tips

Before going straight into the process of removing the tile backsplash, we would like to emphasize the importance of your safety. Make sure that you are wearing the appropriate gear like goggles, gloves, and a dust mask.

Also, if your backsplash goes around the sockets, we recommend turning your home’s power source off. Make sure to remove the covers off of the sockets as well to prevent damage. If there are mounted appliances, we recommend taking them down as well.

You should also make sure that your countertop is free from anything. Once you’ve cleared the countertop, layer a large piece of plastic or cloth on top of it. This will serve to catch all the fallen tiles and debris for easier disposal – plus, it keeps the debris away from your sink.

After you’re done with these preparatory steps, we can now proceed to the main project.

Step 1

The first step is to loosen the first tile. Once you’ve identified the first tile, use the grout cutter as a preliminary way to loosen the tile.

To do so, simply trace the grout cutter along the grout surrounding the tile. Then, use the tile cutter to make an “X” within the tile to further loosen the tile.

Before proceeding to Step 2, you might want to check if the tile is already starting to wobble by tapping it with your fingers. If you feel like it’s not loose enough, you can repeat this step until you think it’s safe to proceed to Step 2.

Step 2

Once the tile is already loose, gently tap the hammer in the center of the tile where the cuts are made. If the tile is loose enough, its pieces would easily fall off without doing any damage to your drywall.

If parts of the tile are still attached, you can chip them off lightly by using a chisel or screwdriver and a hammer.

Step 3

With the first tile out of the way, you can now proceed with popping the surrounding tiles to make an even bigger bare surface. This can be easily done by mounting the blade scraper between the gaps and popping them out lightly with the help of the hammer.

Simply repeat this process until all the tiles are removed. But, make sure that you do so lightly so as not to damage the drywall. Also, it’s best to pop one tile at a time to prevent any damage.

Step 4

Once you have successfully removed the entire tile backsplash, simply use the scraper and 5-in-1 tool to clean up the remaining grout. And if you’re aiming for a smoother surface, you can also finish off with sandpaper.

And that’s it – these are the simple steps on how to remove tile backsplash. Now, you’re ready for the next phase of your kitchen renovation.

FAQs

Before ending this article, we have also answered some frequently asked questions about removing tile backsplash.

What is backsplash?

Backsplash derives its name from being the layer that protects the wall from splashes. This is normally seen in kitchens, particularly on the wall near the sink, and usually spreads through the entirety of the wall adjacent to the counter – mainly to improve the kitchen’s aesthetics.

The most popular materials used for the backsplash include marble, glass, and ceramic tiles, especially considering their protective features.

Can I remove the tile backsplash by myself?

Yes. Removing the tile backsplash is a relatively easy project, so you can do so on your own. Just make sure that you’re wearing the appropriate gear and have taken the proper precautions before removing the tiles.

Can you remove the tile without damaging the drywall?

Yes. As long as you make sure to remove the tiles lightly, there is a low chance of you damaging the drywall. Also, ceramic or porcelain tiles have a better chance of being removed easily without causing much damage, so consider that before you start removing the tiles.

Leave a Comment